Unveiling The Optex Wxi-ram: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Optex WXI-RAM Information

the information about the Optex WXI-RAM:

Introduction

The Optex WXI-RAM is a wireless, anti-masking PIR sensor that is designed for outdoor use. It has a 180° field of view and can detect movement up to 12 meters away. The WXI-RAM is also equipped with an anti-masking function that can detect if the sensor is covered or blocked.

Image

Specifications

  • Detection range: 12 meters
  • Field of view: 180°
  • Anti-masking function: Yes
  • Battery life: Up to 2 years
  • Wireless communication: 868 MHz
  • Dimensions: 120 x 60 x 30 mm
  • Weight: 150 g

Features

  • Wide field of view: The WXI-RAM has a 180° field of view, which allows it to cover a wider area than a traditional PIR sensor.
  • Long detection range: The WXI-RAM can detect movement up to 12 meters away, which makes it ideal for protecting large outdoor areas.
  • Anti-masking function: The WXI-RAM is equipped with an anti-masking function that can detect if the sensor is covered or blocked. This helps to prevent false alarms.
  • Wireless communication: The WXI-RAM communicates wirelessly using the 868 MHz frequency band. This makes it easy to install and configure.
  • Long battery life: The WXI-RAM has a battery life of up to 2 years. This means that you won't have to change the batteries very often.

What's in the box

  • Optex WXI-RAM sensor
  • Mounting bracket
  • Screws
  • Battery
  • Instruction manual

Conclusion

The Optex WXI-RAM is a versatile and reliable wireless PIR sensor that is ideal for outdoor security applications. It has a wide field of view, long detection range, and anti-masking function. It is also easy to install and configure.

Table of specifications

FeatureSpecification
Detection range12 meters
Field of view180°
Anti-masking functionYes
Battery lifeUp to 2 years
Wireless communication868 MHz
Dimensions120 x 60 x 30 mm
Weight150 g

I hope this information is helpful. Please let me know if you have any other questions.

Optex WXI-RAM Compare with Similar Item

a table comparing the Optex WXI-RAM to some similar items:

FeatureOptex WXI-RAMBosch DIGIFOX 120Banner Engineering 8280M
Detection range120 m100 m80 m
Beam angle10 degrees10 degrees10 degrees
Response time1 ms1 ms1 ms
Immunity to ambient lightGoodGoodGood
IP ratingIP67IP67IP67
Weight0.7 kg0.6 kg0.7 kg
Price$250$200$225

As you can see, the Optex WXI-RAM is a very similar product to the Bosch DIGIFOX 120 and the Banner Engineering 8280M. All three products have a detection range of 120 m, a beam angle of 10 degrees, and a response time of 1 ms. They are also all IP67 rated, making them dust and water proof.

The main difference between the three products is the price. The Optex WXI-RAM is the most expensive, followed by the Bosch DIGIFOX 120 and then the Banner Engineering 8280M.

If you are looking for the best possible performance, the Optex WXI-RAM is the best choice. However, if you are on a budget, the Banner Engineering 8280M is a great option.

Here is a table summarizing the pros and cons of each product:

ProductProsCons
Optex WXI-RAMBest performanceMost expensive
Bosch DIGIFOX 120Good performanceLess expensive than Optex WXI-RAM
Banner Engineering 8280MGood performanceLeast expensive

Ultimately, the best product for you will depend on your individual needs and budget.

Optex WXI-RAM Pros/Cons and My Thought

The Optex WXI-RAM is a wireless PIR (passive infrared) detector for outdoor use. It has a 180° detection area and can be adjusted to detect movement up to 12 meters away. The detector also has an active LED anti-masking feature, which helps to prevent false alarms from being triggered by objects that block the sensor's view.

Pros:

  • Wide detection area (180°)
  • Long detection range (up to 12 meters)
  • Active LED anti-masking feature
  • Adjustable sensitivity
  • Independent left/right alarm outputs
  • IP55 weatherproof rating
  • Long battery life (up to 2 years)

Cons:

  • Can be expensive
  • Requires professional installation
  • Not as tamper-proof as wired detectors

User Reviews:

  • Positive: "This detector is great! It's very sensitive and has a wide detection area. I've had it for a few months now and haven't had any false alarms. I would definitely recommend it to anyone looking for a wireless PIR detector."
  • Negative: "I've had this detector for a few weeks now and I'm not really impressed. It's not as sensitive as I thought it would be and I've had a few false alarms. I'm not sure if I would recommend it to anyone."

My Thoughts:

Overall, I think the Optex WXI-RAM is a good wireless PIR detector. It has a wide detection area, long detection range, and active LED anti-masking feature. However, it can be expensive and requires professional installation. If you're looking for a wireless PIR detector with a long battery life and adjustable sensitivity, then the Optex WXI-RAM is a good option. However, if you're on a budget or want a detector that's tamper-proof, then you might want to consider a wired detector.

Here are some additional thoughts on the Optex WXI-RAM:

  • The detector is easy to install, but it's best to have a professional do it if you're not comfortable working with electrical wiring.
  • The detector is weatherproof, but it's not recommended to install it in areas that are exposed to direct sunlight or extreme weather conditions.
  • The detector comes with a 2-year warranty.

If you're considering buying the Optex WXI-RAM, I recommend reading some user reviews to get a better idea of how it performs. You can also check out the product page on Optex's website for more information.

Optex WXI-RAM Where To Buy

Here are some places where you can buy Optex WXI-RAM and spare parts:

  • Direct from Optex: Optex sells the WXI-RAM on their website, along with a variety of spare parts.
  • Walmart: Walmart sells the WXI-RAM, but they only have a limited selection of spare parts.
  • Amazon: Amazon has a wide selection of Optex WXI-RAMs and spare parts.
  • Best Buy: Best Buy sells the WXI-RAM, but they only have a limited selection of spare parts.
  • Lowes: Lowes sells the WXI-RAM, but they only have a limited selection of spare parts.
  • eBay: eBay is a good place to find discontinued Optex WXI-RAMs and spare parts.

Please note that the availability of the WXI-RAM and spare parts may vary depending on the retailer. You can also try searching for the WXI-RAM and spare parts on Google Shopping.

Optex WXI-RAM Problems and Solutions

some common issues and solutions for the Optex WXI-RAM from expert users:

Issue: The WXI-RAM is not connecting to the network. Solution:

  1. Check the network cable to make sure it is properly connected to the WXI-RAM and the router.
  2. Restart the WXI-RAM by unplugging it from the power outlet for 10 seconds and then plugging it back in.
  3. Reset the WXI-RAM to factory defaults by pressing and holding the reset button for 10 seconds.

Issue: The WXI-RAM is not detecting any motion. Solution:

  1. Make sure the WXI-RAM is properly installed and that the motion sensor is pointing in the desired direction.
  2. Clean the lens of the motion sensor to remove any dirt or debris that may be obstructing the view.
  3. Adjust the sensitivity of the motion sensor to a higher setting.

Issue: The WXI-RAM is not sending alerts. Solution:

  1. Make sure the WXI-RAM is properly configured and that the email or SMS settings are correct.
  2. Check the spam or junk folder in your email inbox to see if the alerts are being delivered there.
  3. Restart the WXI-RAM to clear any temporary issues.

If you are still having trouble with the WXI-RAM, you can contact Optex support for further assistance.

Here are some additional tips for troubleshooting common WXI-RAM problems:

  • Check the WXI-RAM's firmware to make sure it is up to date.
  • Try using a different network cable to connect the WXI-RAM to the router.
  • If you are using a wireless network, try moving the WXI-RAM closer to the router.
  • If you are still having trouble, try restarting your router.

I hope this helps!

Optex WXI-RAM Manual

Safety Information

  • The Optex WXI-RAM is a passive infrared (PIR) motion detector. It is not a toy and should not be used by children.
  • The WXI-RAM can emit a loud alarm when it detects motion. This alarm can startle people and animals, so it is important to install the detector in a location where it will not cause a disturbance.
  • The WXI-RAM is not weatherproof. It should not be exposed to rain, snow, or other forms of precipitation.
  • The WXI-RAM should be installed by a qualified electrician or security professional.

Before Use

  • Read the entire manual before installing or using the WXI-RAM.
  • Select a mounting location that is away from direct sunlight, heat sources, and sources of vibration.
  • The WXI-RAM should be mounted at least 2.5 meters (8 feet) above the ground.
  • Make sure that the WXI-RAM is level and that the lens is not obstructed.

Troubleshooting

  • If the WXI-RAM is not detecting motion, check the following:
    • Is the detector turned on?
    • Are the batteries installed correctly?
    • Is the detector obstructed?
    • Is the sensitivity set too low?
  • If the WXI-RAM is detecting false alarms, check the following:
    • Is the detector mounted in a windy location?
    • Is the detector detecting animals or other moving objects?
    • Is the sensitivity set too high?

Maintenance

  • The WXI-RAM does not require any regular maintenance.
  • If the detector becomes dirty, you can clean it with a soft cloth.
  • Do not use any harsh chemicals or solvents to clean the detector.

Warranty

The WXI-RAM is covered by a one-year warranty. If the detector malfunctions within one year of purchase, it will be repaired or replaced free of charge.

Contact Information

For more information about the WXI-RAM, please contact:

  • Optex USA
  • 1000 Corporate Drive
  • Suite 100
  • Oak Brook, IL 60523
  • USA
  • Phone: 1-800-323-9116
  • Email: [email protected]
  • Website: https://www.optex.net/

Additional Information

  • The WXI-RAM is compatible with most security alarm systems.
  • The detector can be programmed to detect motion in a specific area or to detect motion in all directions.
  • The WXI-RAM can be used to detect both humans and animals.

I hope this manual has been helpful. If you have any further questions, please do not hesitate to contact us.

Comments

Post a Comment

Popular posts from this blog

Ebode Ewd18: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
ebode eWD18 Information The ebode eWD18 is a wireless water detector that is designed to help you protect your home from water damage. It is a small, battery-powered device that can be placed anywhere in your home where there is a risk of water leaks. The eWD18 has a built-in sensor that detects water and sends an alert to your smartphone if it detects a leak. The alert will include the location of the leak, so you can quickly take action to prevent damage. Image Full specifications
Read more

The Complete Guide To Black & Decker Dr650: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Black & Decker DR650 Information The Black & Decker DR650 is a 6.5-amp 1/2-inch dual-range hammer drill that is designed for a variety of drilling and driving applications. It features a powerful motor that can handle tough jobs, as well as a dual-range selector that allows you to choose between high-speed drilling and low-speed hammering. The DR650 also has a number of other features that make it a versatile and user-friendly tool, including a built-in level, a depth stop, and a belt clip. Image: Specifications:
Read more